GoPod /Eriba 24mm Locknuts
Stock Code: V304GoPod / Eriba Locknuts
24mm across flats
ALKO Part 1312008
M16x1.5
Special fitting instructions:
Tighten the collar nut to 50Nm whilst rotating the hub until resistance is felt. (Use a torque wrench)
Back off the collar nut thirty degrees and lock using the special tool.
Stake the collar of the nut into the groove on the stub axle.
Fit the hub cap.
End play of 0.05mm permitted. The collar of the nut must not be sheared. Overtightening the bearing causes bearing damage.
Minimum Order 1
